Search
Products
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Furring Channel / Hat Channel
Furring Channel for Walls and CeilingsEconomical hat-shaped framing component used to “furr” out ceilings and masonry walls.
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
Drop Ceiling Assemblies
Rigid structural support for gypsum wallboard, veneer plaster or drop ceiling assemblies
Hanger Wire & Tie Wire
Hanger Wire & Tie WireWire support for drop ceiling assemblies
ProSTUD® Drywall Framing System
Steel Drywall Studs with smart edge™ technologyProSTUD Drywall Framing System (ProSTUD® and ProTRAK®) with Smart Edge™ Technology is the innovative steel drywall stud that sets a new industry…
Structa Wire Project Photo Gallery
Structa Wire products have been used on countless buildings over the years.If you have just completed a project, please send us photos and details at info@clarkdietrich.com and we will share your…
Metal Furring Channel Clips (MFCC)
Quickly facilitates the attachment of metal furring channel to 1-1/2" U-channel in ceiling assembliesMetal Furring Channel Clips are made of galvanized wire and used to attach Metal Furring Channels…
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.