Search
Products
BackerBead® Drip Flashing - 3-1/2" Flange
Drip flashing with built-in closed cell backer rodBackerBead® Drip Flashing - 3-1/2" Flange is designed to provide positive drainage above exterior window and door openings while also providing a…
BackerBead® with Short Flange
Casing Bead with factory applied blue backer rodBackerBead® with Short Flange is perfect for situations where the standard 1-3/4" flange size is too large for the application. Factory-applied blue…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco BaseA superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone…
V Truss - Walls & Ceilings
Wall & Ceilings ReinforcingV Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…
Drip Casing
Drip leg directs moisture away from openings and foundation wallsDesigned to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May be…
Drip Flashing - 3" and 3-1/2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Positive Drain Weep Screed
Designed to provide a flashing transitionFrom stucco, siding, stone over a brick ledge, at a wall transition.
BackerBead® with Rip-Bead®
1/4" removable leg provides a clean, stucco-free caulk gapAssures efficient caulk seal for optimal moisture protection.
Original BackerBead®
Combination PVC Casing Bead with built-in closed cell backer rodEliminates the need to install a backer rod separately, as the product features a factory-applied backer rod that is affixed to the…
Top Vent Track for Rainscreen - TVTRS
Designed to be used at the top of entangled mesh rainscreen assemblies.
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco BaseA superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB)…
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep…
Striplath
Reinforcement for corners, windows, doors and openingsStriplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is…
Casing Bead / Plaster Stop
Used to neatly terminate stucco and plasterTerminates stucco and plaster against windows, doors and other dissimilar materials.
Foundation Weep Screed
Moisture removal from stuccoActs as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredStainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on…
Drip Flashing for Rainscreen - DFLRS
Designed to be used at the bottom of entangled mesh rainscreens.
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
Stainless Steel Dimpled Self-Furring Lath
1/4" self-furring, dimpled, stainless steel Plaster and Stucco BaseA stainless steel, self-furring expanded dimpled metal lath ideal for exterior use over concrete or UL fire-rated sheathing, masonry…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
Archmaker™ Drip Flashing - 2" Flange
Designed to be used above window and door openings or at the foundation lineTo assist with moving moisture away from the wall.
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.