Search
Products
Skewable Angle
FOR RIGID AND OFF-ANGLE ATTACHMENTS OF JOIST-TO-JOIST, JOIST-TO-HIP BEAM, OR TO OTHER STRUCTURAL STEEL MEMBERS
ClarkDietrich Skewable Angles are used to make rigid attachments of joist-to- joist or…
Seismic and Hurricane Ties (HC2, HC2A, HC2.5, HC3)
ATTACHES AND secures TRUSSES AND RAFTERS TO BUILDING STRUCTURE
ClarkDietrich Seismic and Hurricane Ties are designed to provide wind and seismic resistance for trusses and rafters.
Mini-Bead™ 800 and 900
Provides superior keying for joint compound for one-coat plaster veneer systemsMini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat…
Uni-Clip™ End Clip (UCEC)
14 Gauge rigid connection clip
ClarkDietrich’s Uni-Clip™ framing clip is a universal framing clip used to attach and support numerous rigid framing conditions.
Gusset Plates (G-Series & GP-Series)
Punched Or Unpunched Gusset Plates
Gusset plates for easier and faster attachments of X-Bracing or roof framing
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
E-Screen (Drainage Mat)
Rainscreen Drainage MatClarkDietrich E-Screen can be used in stucco, stone veneer, brick, or under various siding installations to provide an effective method for drainage and ventilation in the wall…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Light and Medium Framing Angle
Light and Medium Framing Angle
CDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Gusset Clips
GUSSET CLIPS
A one-piece design provides 3-way connection (top-bottom-side) for a variety of applications.
Medium Clip Angle
Medium clip angle
12 gauge angles used to attach back-to-back installation.
Framing Angles
light and medium framing angles
CDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints).
Mending Tie Plate
MENDING TIE PLATES
Versatile and easy-to-use mending plates for wood-to-wood connections.
Nail Stop Plates
nail stop PLATES
Designed to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines.
Steel Plywood/Sheathing Clip
steel plywood / sheathing clip
Fast and easy - just slip over the sheathing edge. Eliminates unreliable wood blocking.
Twist Straps (CDLST Series)
TWIST STRAPS
Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Tie Plate Anchor Series (CDTPA)
TIE PLATE ANCHOR SERIES
The CDTPA Anchor Series is manufactured to resist uplift of the top plate(s) of solid sawn or structural composite lumber wall members from solid sawn or structural composite…
Nail Plates
nail PLATES
Nail Plates are used for attaching wooden members together in a non-structural connection.
Light Straps (CDLS Series)
Light STRAPS
Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Medium Straps (CDLMS Series)
Medium STRAPS
Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Straps (CDMS Series)
STRAPS
Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Rolled Straps
rolled STRAPS
Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.
Cornerite™
Reinforcement for inside or outside cornersCornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from…
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
Connector Clips (for Control Joints)
Designed to assist in the alignment of control joints
And to provide a base for caulking.
Straight and Mitered Connector Clips (for Soffit Vents)
Assists in the alignment of soffit vents
Connects multiple sections.
Connector Clips (for Channel Reveals)
Designed to be used with channel reveals as a base for sealants
And to assist in alignment.
DS15 Drip
Used with drip screed and as drip in special conditions
Such as soffits, balconies, etc.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
Colored Vinyl
Color LeadershipIn addition to our standard white vinyl accessories, we’ve taken the lead in stocking vinyl accessories in tan, brown, gray and black that perfectly complement common mortar colors.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.
"L" and "T" Strap Ties
"l" and "T" strap tiesEconomical braces are ideal for gates, patio covers, joining posts and columns to headers, beams and other applications where added reinforcement is needed.