Search
Products
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stuccoMay be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applicationsAvailable with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areasOne-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board. Vent…
Splayed Corner Bead
Superior finish and reinforcement for off-angle drywall corners135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersectionsPRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded cornersBullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
3/8" Radius Splayed Bullnose Corner Bead
3/8" Radius Bullnose splayed corner bead3/8" Radius Bullnose Splayed Corner Bead is designed for off-angle outside corners conditions.
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed cornersOff-angle tape-on 135° inside or reverse splayed bead is used to achieve a crisp, clean, straight finished…
Paper-Faced Bullnose Splayed Tape-on
Provides rounded 135° outside drywall corners for a contemporary "modern" lookOff-angle bullnose tape-on bead, also known as splayed bullnose or 135° bullnose corner bead is used to provide a rounded…
Paper-Faced Bullnose Splayed Nail-On
Used to provide rounded 135° outside drywall corners when nailing or mechanical fastening is desired or requiredOff-angle nail-on bullnose bead, also known as splayed bullnose or 135° bullnose corner…
"F" Series Control Joint and Vent
Designed to work on narrow overhangsWhere vents are needed to go against fascia or walls.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded cornersPRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
Soffit Vents (One-Piece)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit VentReinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit VentFor stucco and plaster with vertical edge clips provided for special installations.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
FCS Soffit Vent
Available in several grounds and widthsCan be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersectionWhen a drip and soffit vent need to be combined.
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control jointAllowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.