Search
Products
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
#2A Expanded Corner Bead
RIGID, Expanded flange corner bead for exterior cornersA more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A…
304 or 316 Stainless Steel Diamond Mesh Lath
when the ultimate corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or contoured…
304 or 316 Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
Paper-Faced Inside Bullnose Corner
Creates subtle, smooth, inside bullnose cornersTape-on inside bullnose 90° paper-faced corner bead provides subtle, rounded inside corners.
Paper-Faced Square Nail-On Corner Bead (CD1-UB)
Provides square drywall corners and is used when nailing or mechanical fastening is desiredPaper-faced nail-on beads combine galvanized metal corner and edge protection with high-grade paper to…
304 or 316 Stainless Steel Dimpled Self-Furring Lath
When the highest levels of corrosion resistance are requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
Paper-Faced Inside Corner Bead
Provides incredibly straight and smooth inside 90° corners for drywall finishingRigid steel-reinforced inside corners provide a durable guide to achieve exceptionally straight and sharp inside…
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compoundPaper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed cornersOff-angle tape-on 135° inside or reverse splayed bead is used to achieve a crisp, clean, straight finished…
Paper-Faced Bullnose Tape-on
Creates elegant, rounded outside drywall corners adding contemporary styling and a sense of openness to any room3/4" tape-on bullnose corner bead is used to create a smooth, rounded look to standard…
Paper-Faced Bullnose Splayed Tape-on
Provides rounded 135° outside drywall corners for a contemporary "modern" lookOff-angle bullnose tape-on bead, also known as splayed bullnose or 135° bullnose corner bead is used to provide a rounded…
Paper-Faced Bullnose Splayed Nail-On
Used to provide rounded 135° outside drywall corners when nailing or mechanical fastening is desired or requiredOff-angle nail-on bullnose bead, also known as splayed bullnose or 135° bullnose corner…
Paper-Faced Bullnose Nail-On
Provides elegant and contemporary rounded drywall corners and is used when nailing or mechanical fastening is desired3/4" nail-on bullnose corner bead is used to create a smooth, rounded look to…
#15 Zinc Double-V Control Joint
CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V…
#XJ15 Zinc Double-J Control Joint
Corrosion resistant Expanded flange control joint with a taped reveal#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
093 Zinc Control Joint (ZNCJ)
Drywall or veneer plaster control jointClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and…
Zinc Control Joints #38, #50 & #75
Resists corrosion on applications of plaster and stucco
A solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75…
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
#66X Zinc Expanded Flange Casing Bead
Expanded flange casing bead or plaster stopUsed as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors…
#66N Zinc Short Flange Casing Bead
Short flange casing bead to terminate stucco or plaster edge
Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at…
#1A Zinc Expanded Corner Bead
Expanded flange corner bead for exterior cornersA strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance…