Search
Products
Drift Rail (DR97) and Clip (DRC)
UNIVERSAL 2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONSClarkDietrich Drift Rail 97mil (12ga) and Clip 97 mil or 68mil (12ga or 14ga) is a uniquely designed two-piece system that is used…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Control Joint and Reveal Combinations
Designed to relieve stress and assist in controlling cracking in large areas of walls and ceilingsAlso creating 1/4" to 1-1/2" reveal in Stucco.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combinedUsed to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occurVent clips are provided to connect reveal sections and to assist in…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systemsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature controlThis vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aestheticThe slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air to…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flange allow the base coat mixture to easily flow through and bond with the substrate.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Furring Channel / Hat Channel
Furring Channel for Walls and CeilingsEconomical hat-shaped framing component used to “furr” out ceilings and masonry walls.
L-Angle / Corner Angle
L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection…
U-Channel (CRC)
Traditional cold-rolled Channel (CRC) for bridging
ClarkDietrich U-Channel or Cold Rolled Channel (CRC) are one of the most common bridging methods used to provide resistance to stud rotation and…
Structural Studs
ClarkDietrich Cold-Formed Steel C-Studs (C-Series™)Cold-Formed / Light-Gauge C-shaped framing members for axial load-bearing walls, curtain walls, tall interior partitions, floor joists and roof…
Structural Track
ClarkDietrich Cold-Formed Steel TrackU-shaped channel runners used as the top and bottom tracks to secure wall studs or end support closures for floor joist framing. Structural Steel Track can be…
Drift FastClip™ Slide Clip (D-FCSC)
Vertical and lateral building movement up to 2"
ClarkDietrich Drift FastClip™ Slide Clips 68mils (14ga) or 97mils (12ga) are used to attach exterior curtain-wall studs to the building structure and…
Drift Headed Rail (DHR97) and Drift Clips (DRC)
2-PIECE SYSTEM FOR DRIFT, DEFLECTION AND RIGID APPLICATIONS for cast-in-placeClarkDietrich Drift Headed Rail (DHR-97) and Drift Clip 97 mils or 68mils (12ga or 14ga) is a uniquely designed two-piece…
Drum Channel Reveal (with perforated flanges)
Creates narrow 1/4" reveals in stucco and plaster surfaces
Drift Head-of-Wall (DHW)
Head-of-wall drift and deflection for exterior curtain wall and interior, nonload-bearing wallsClarkDietrich Drift Head-of-wall clips are used in deflection conditions for in-fill curtain wall…
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfacesClips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combinedTo assist with moving moisture away from the wall.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
PanelTRAK
Steel Track for direct web bearingPanelTRAK is a structural steel track that allows steel studs to bear directly on the track web rather than the radii of the track corners. Because…