Interior Finishing: Vinyl / PVC


093 Vinyl Control Joint
Used to relieve expansion and contraction stresses
093 Control Joint provides stress relief and assists in controlling cracking in large areas of wallboard.

Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling grid
Rip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.

"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.


"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfaces
Designed to be used at the juncture of door jambs, windows and other unfinished surfaces.

"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.

1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.

3/4" Bullnose 2-Way Inside Corner Cap
A professional finish where two bullnose corners meet at 90°
3/4" Bullnose 2-Way Inside Corner Caps provide the ideal component to transition bullnose corner beads to a crisp finish where inside corners intersect at 90°.

3/4" Bullnose 3-Way Outside Corner Cap
Designed to finish intersections where three outside 3/4" radius bullnose corner beads meet at 90° angles
Eliminates time consuming mitering and provide the ideal solution to finish corners quickly and efficiently at three-way 90°, 3/4"…

3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.

3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown molding corners into 3/4" bullnose systems.…

3/4" Inside Corner Cove
3/4" radius, inside corner cove
Designed to complement the outside corners created by the bullnose corner bead.

3/4" Splayed Inside Corner Cove
3/4" radius, splayed inside corner cove
Designed to complement ClarkDietrich vinyl 3/4" bullnose splayed corner bead. Adjustable from 120° to 140° for off-angle inside corner conditions.

Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.

Bullnose Corner Bead
Used to create elegant, contemporary, rounded 90° drywall corners
Bullnose Corner Bead is used to create subtle dimension and softens the look of outside corners. PRO-Bull 3/4" also available for extra rigid vinyl corner bead designed for…

Bullnose Kerfed Corner Bead
Creates a rounded or bullnose paintable finish around door and window trims
Bullnose kerfed corner bead is designed with a return leg that can be inserted into the channel of door and window jambs.

Chamfered Corner Bead
Chamfered edge for a modern look
Designed with a 3/4" chamfered edge at the corner to provide a modern look and shadowing effect.

F-Bead
Covers raw edges of drywall
Designed to cover raw edges of drywall and provide a 1/2" horizontal extension.

Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfaces
All intersections are manufactured in a controlled factory environment to the highest quality standards.

Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standards
Miter cuts are made with precision to ensure proper fit at all connections.

J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.

L-Bead
Provides clean, sharp edge at wallboard terminations
L-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.

Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Muddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as masonry, glass, door frames and window…

Partition End Caps
Quickly finishes doorways, knee walls and wall ends
Finish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.

PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.

PRO-90 Archway
Used to finish arches, curvatures and most radius conditions
PRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius on the nose aides in smooth and easy…

PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.

PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcement
PRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.

PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.

PRO-Bull 3/4" Archway
For finishing arches, curvatures and most radii with a rounded bullnose look
3/4" radius bullnose corner bead (VBAB) designed with slotted flange that easily forms to curves and arches with a soft, rounded finish.

PRO-Bull 3/4" Corner Bead
Used to create elegant, contemporary, rounded 90° drywall corners
PRO-Bull 3/4" radius bullnose provides soft, rounded aesthetic to outside corners.

PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.

Rip-Bead® Flat L-Bead
Cover raw edges of drywall
Designed for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.

Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other materials such as masonry, glass, door…

Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.

Shadow Reveal