Search
Products
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco BaseSelf-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the…
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall boardFor use in Direct-Applied Exterior Finish Systems (DEFS).
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco ReinforcingStructalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
Mega Lath
heavy duty ReinforcingMega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
V-Truss Corner
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Structalath III & Structalath III 316
Stucco ReinforcingStructa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
"DX" Expansion Joint
Control cracking in large areas of wallboardProvides stress relief and assists in the controlling of cracking across large areas of wallboard.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARDCovers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1/2…
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumRip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersectionsJ-Bead is designed to cover raw edges of drywall under all window and door casing.
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
304 or 316 Stainless Steel Self-Furring V-Groove Lath
when the ultimate Self-Furring corrosion resistance is requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
304 or 316 Stainless Steel Dimpled Self-Furring Lath
When the highest levels of corrosion resistance are requiredWhen the highest levels of corrosion resistance are required, a stainless-steel lath is useful in special applications over flat or…
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit boardOne-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
F40 (Female Casing Expansion Joint Component)
Female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Component)
Male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
3/8" Rib Lath
The most rigid of all expanded metal lath productsA High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet.…
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco BaseA self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as…