Search
Products
3/4" Bullnose 2-Way Inside Corner Cap
A professional finish where two bullnose corners meet at 90°
3/4" Bullnose 2-Way Inside Corner Caps provide the ideal component to transition bullnose corner beads to a crisp finish where inside…
Soffit Vent Control Joint Combination
Continuous, one-piece, combination design like a control joint
Allowing movement of the plaster with a vent area that has a perforated flange to assist with embedment.
"F" Series Control Joint and Vent
Designed to work on narrow overhangs
Where vents are needed to go against fascia or walls.
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Miscellaneous Soffit Vent
One-piece Soffit Vent designed for plywood, soffit board, and three-coat stucco
May be combined with Starter Strips / Casing Beads or DEFS Casing Beads.
Surface Mount Soffit Vent
One-piece soffit board designed for venting soffit areas over exterior board in EIFS and DEFS applications
Available with 2", 3", 4" wide vents, each with a 1/8” ground. Vent clips are provided to…
Soffit Vent with Perforated Flanges
Provides an economical means for venting soffit areas
One-piece soffit vent with perforated flanges to assist in embedment of the base coat mixture and to cover the raw edges of the soffit board.…
Vented Shadow Reveal
Designed for ceilings when a vented reveal is required at the juncture of a wall and ceiling where horizontal movement may occur
Vent clips are provided to connect reveal sections and to assist in…
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aesthetic
The slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.
3/4" Bullnose 3-Way Outside Corner Cap
Designed to finish intersections where three outside 3/4" radius bullnose corner beads meet at 90° angles
Eliminates time consuming mitering and provide the ideal solution to finish corners quickly…
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
Tile Cap
Preferred method where sink or lavatory is to be recessed
A punched metal strip attached to the front edge of the cabinet is used in some geographical areas as a screed and support for the…
Soffit Vents (One-Piece)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster with a perforated flange.
Soffit Vents (One-Piece with Edge Clip)
Continuous one-piece Soffit Vent
Reinforcing rib to key into stucco and plaster. Vertical edge clips are provided for special installations.
Soffit Vents (Two-Piece Narrow Overhang)
Continuous two-piece Soffit Vent
For stucco and plaster with vertical edge clips provided for special installations.
FCS Soffit Vent
Available in several grounds and widths
Can be ordered with the 300VFZ clip for installation.
Vented Drip Screed
Designed to address finishing the plaster to the vertical soffit area intersection
When a drip and soffit vent need to be combined.
Factory Fabricated Vinyl Control Joints
Control joint intersections are manufactured in a controlled factory environment to the highest quality standardsMiter cuts are made with precision to ensure proper fit at all connections.
Soffit Vents (Three-Piece with Edge Clip)
Continuous three-piece Soffit VentFor stucco and plaster.
Soffit Vents (Three-Piece)
Continuous three-piece Soffit VentFor stucco and plaster.
"F" Series Architectural Soffit Vent
AFCS Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.
Architectural Soffit Vent
Series of one-piece soffit vent with a reinforcing rib to key into stucco3/4" elongated vent holes.