Search
Products
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
F-Bead
Covers raw edges of drywallDesigned to cover raw edges of drywall and provide a 1/2" horizontal extension.
Strait-Flex® Edge-Tape
Designed to replace tear-off beadEdge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Rip-Bead® Flat L-Bead
Cover raw edges of drywallDesigned for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Load Share Clip (CDLSC)
LOAD SHARE CLIPThe CDLSC load share clip series is manufactured to transfer loads between two truss or framing ply members made of solid sawn or structural composite lumber.
Hurricane Anchor Clips
HURRICANE ANCHOR CLIPSThe CDHTHA anchor series is manufactured to attach metal plate connected trusses, framing members and wall members, made of solid sawn or structural composite lumber; to solid…
Hurricane Tie (CDHT2A, 2.5A, 2.5T, 3)
HURRICANE tieUsed as a connection between truss/rafters and walls to resist lateral and uplift conditions.
Hurricane Tie (CDHT6, 8)
HURRICANE tieUsed as a connection between truss/rafters and walls to resist lateral and uplift conditions.
Hurricane Tie (CDHT1, 10A, 10S)
HURRICANE tieDesigned to hold trusses on both sides to transfer uplift loads from roof framing members to the wall studs.
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
Partition End Caps
Quickly finishes doorways, knee walls and wall endsFinish doorways, wall ends, knee walls and closets by eliminating the need for a drywall rip and two corner beads.
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
#701B/#801B Zinc L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminations
Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Truss Spacer / Bracer
TRUSS SPACER / BRACERThe Truss Spacer/Bracer is used for lateral bracing and spacing of trusses 24 inches on center.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
ClarkDietrich Area Separation Wall Systems
Non-load bearing, 2-hour and 3-hour rated vertical wall assembliesThey provide fire-resistant protection between adjacent living units in apartment buildings, condominiums and townhouses.
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.