Search
Products
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.
Conforms to most arched and curved designs.
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Bullnose Corner Bead (CBB)
Creates elegant, rounded outside drywall corners
Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness…
Paper-Faced Bullnose Tape-on
Creates elegant, rounded outside drywall corners adding contemporary styling and a sense of openness to any room
3/4" tape-on bullnose corner bead is used to create a smooth, rounded look to…
Paper-Faced Bullnose Nail-On
Provides elegant and contemporary rounded drywall corners and is used when nailing or mechanical fastening is desired
3/4" nail-on bullnose corner bead is used to create a smooth, rounded look to…
3/4" Bullnose 2-Way Inside Corner Cap
A professional finish where two bullnose corners meet at 90°
3/4" Bullnose 2-Way Inside Corner Caps provide the ideal component to transition bullnose corner beads to a crisp finish where inside…
3/4" Inside Corner Cove
3/4" radius, inside corner cove
Designed to complement the outside corners created by the bullnose corner bead.
3/4" Splayed Inside Corner Cove
3/4" radius, splayed inside corner cove
Designed to complement ClarkDietrich vinyl 3/4" bullnose splayed corner bead. Adjustable from 120° to 140° for off-angle inside corner conditions.
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
3/4" Bullnose 3-Way Outside Corner Cap
Designed to finish intersections where three outside 3/4" radius bullnose corner beads meet at 90° angles
Eliminates time consuming mitering and provide the ideal solution to finish corners quickly…
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
Bullnose Corner Bead
Used to create elegant, contemporary, rounded 90° drywall corners
Bullnose Corner Bead is used to create subtle dimension and softens the look of outside corners. PRO-Bull 3/4" also available for…
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
Bullnose Kerfed Corner Bead
Creates a rounded or bullnose paintable finish around door and window trims
Bullnose kerfed corner bead is designed with a return leg that can be inserted into the channel of door and window jambs.
V Truss
Corner ReinforcingInnovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
PRO-Bull 3/4" Corner Bead
Used to create elegant, contemporary, rounded 90° drywall cornersPRO-Bull 3/4" radius bullnose provides soft, rounded aesthetic to outside corners.
PRO-Bull 3/4" Archway
For finishing arches, curvatures and most radii with a rounded bullnose look3/4" radius bullnose corner bead (VBAB) designed with slotted flange that easily forms to curves and arches with a soft,…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
Mud-Pro 2
compound applicatorMud-Pro2 is the fastest, cleanest, and most durable compound applicator on the market. Designed to apply precise amount of compound to inside and outside 90 corner beads…