Search
Products
DEFS 45 Degree L-Bead
Trim component used to finish around window and door openingsUsed as a backing for perimeter sealant application.
DEFS L-Stop Casing Bead with Splice
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
DEFS L-Stop Casing Bead
Provides casing against doors, windows and other dissimilar materialsDesigned to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS).
Drum Channel Reveal (with perforated flanges)
Creates narrow 1/4" reveals in stucco and plaster surfaces
#701B/#801B L-Trim
Applied after panel installation to finish veneer plaster edges at wall terminationsVeneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough…
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
Paper-Faced L-Trim
Protects and finishes wallboard edge when gypsum panels abut dissimilar surfacesL-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams,…
Strait-Flex® L-Bead
Designed to finish edges of drywallIdeal for window returns, sky lights and wall edges.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfacesNo backing or blocking needed.
Rip-Bead® L-Bead
Creates a clean line at intersection of gypsum board and ceiling gridRip-Bead® L-Bead is designed to cover the raw edges of drywall at ceilings, windows and other finished interior components.
"DX" Expansion Joint
Control cracking in large areas of wallboardProvides stress relief and assists in the controlling of cracking across large areas of wallboard.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combinedPre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
F40 (Female Casing Expansion Joint Component)
Female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Component)
Male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfacesCreates edge reveal when butting up to ceilings, base trim and other finished interior components.
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfacesCreates edge reveal when butting up to ceilings, base trim and other finished interior components.
L-Bead
Provides clean, sharp edge at wallboard terminationsL-Bead is designed to cover raw edges of drywall at ceilings, windows and other finished interior components.
"V" Channel Reveal
Create a modern look and shadowing effectDesigned with a dramatic, deep "V" reveal.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfacesClips are provided for alignment and as a base for sealants.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Metal L-Trim #200-B (M20B)
Provides a clean finished edge for wallboardMetal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings,…