Exterior Finishing: Corner Beads
Exterior Finishing: Corner Beads
Products
GALVANIZED STEEL Expanded flange corner bead for exterior corners
A solid nose, all-purpose exterior corner bead. Strong and economical with multiple general use purposes.
Expanded flange corner bead for exterior corners
A strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance when compared with the galvanized steel version.
RIGID, Expanded flange corner bead for exterior corners
A more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A Corner Bead provides extra strength and rigidity by incorporating a wider 3-1/4” flange with an added stiffener ridge. The Double-X is an ideal choice for corners in high-traffic areas.
Expanded flange inside corner control joint
#30 Corner Master™ Expansion/Contraction Control Joint (Double-V) is designed to provide stress relief at inside corner intersections on plaster walls. The Double-V expansion joint absorbs movement resulting from expansion and contraction of plaster walls and controls cracking.
Provides true, uniform, curved, or arched reinforcement
Conforms to most arched and curved designs.
True, uniform, curved, or arched corner reinforcement with a bullnose design.
Conforms to most arched and curved designs.
3/4" radius bullnose provides hard-to-damage, rust-proof corners
Designed for use in high-traffic areas.
3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returns
Designed for use in high-traffic areas.
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may requrie field alighment.
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may requrie field alighment.
Reinforcement for inside or outside corners
Cornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from finished, edge strip lath and bent lengthwise to a 100° angle ensuring a snug fit into 90° inside corners and over 90° outside corners.
Fully Embedded Corner Bead
Provides reinforcement like welded-wire or woven wire laths.
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Designed to relieve stress caused by expansion and contraction
In wall and ceiling inside angles.
Provides damage-resistant, rust-proof, and straight corners
Designed with a shorter, 1-1/2" flange for narrow returns.
Provides hard-to-damage, rust-proof, and straight corners
Open triangles on the flanges allow for full embedment.
Corner Reinforcing
Innovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.
Wide Flange Corner reinforcement
Wide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.
Stronger exterior corners
A welded wire, right angle assembly, affording a truer, stronger, exterior corner that reduces cracking in Portland cement plaster or stucco. Wire corners are to be installed below the stucco surface, embedded at least 1/4” below the stucco finish surface.
Corner reinforcement
Zinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges are tapered along the outer edges to enhance veneer plaster concealment.