Search
Products
HDSC Header Bracket
Header Clip for RedHeader PRO™ and HDS Framing Systems
The HDSC Header Bracket (HDSC) is the perfect complement to the RedHeader PRO™ and HDS® Framing system. This simple, yet innovative header…
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
RedHeader PRO™ Rough Opening System
provides versatility for walls and ceilings contractors
Designed to replace conventional boxed headers and built-up jambs and provide better results in half the time.
Header Cripple Stud Clip
Eliminates the header track material and is a more economical alternative
Universal Header Hanger (H-Series)
used to connect box headers to jambs or beams to columns
The H-Series™ Universal Header Hanger is used to connect box headers to jambs or beams to columns and transfer large vertical loads.
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
L-Header
Preformed L-header that slides into place quickly
L-Headers are prefabricated light-gauge 90° L-sections that are used in load-bearing wall framing.
HDS® Framing System
heavy-duty framing stud for headers, jambs, posts and built-up tube truss chords and webs
The superior strength and carrying capacity of the HDS means higher performance with fewer members.
Structural Rim Track
Provide a lightweight, low-cost, rigid floor assembly
Structural track, usually in the same gauge as the joist, is used as rim or band enclosures.
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
CI Weep Track
Directs water drainage
Designed to be used with #1 Corner Bead around windows and doors and at the foundation line.
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
EasyClip™ Quick Twist Web Stiffener
Provide reinforcement at critical load points to prevent web crippling
(QTWS) EasyClip™ Quick Twist Web Stiffeners are used to provide reinforcement of joist webs to prevent crippling.
Box Header Clip
Pre-punched Clip for box header Framing
The Box Header Clip (BHC) is designed to eliminate field cutting metal track into sections. The BHC clip is pre-punched to promote a quick and accurate…
TradeReady® Structural Bridging (TDSB)
Provides a quick and efficient method to prevent joist rotation
TradeReady® structural blocking is the third component of the TradeReady® steel floor system. Structural blocking is pre-cut to fit…
C-Joist
Provide a lightweight, low-cost, rigid floor assembly
C-Joist components provide an economical, lightweight alternative to open web trusses, bar joists, engineered lumber, cast-in-place or hollow…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined