exterior finishing: Galvanized Metal
Self-Furring Dimple Lath
1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco Base
A self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM…
3/8" Rib Lath
The most rigid of all expanded metal lath products
A High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet. These ribs provide the superior strength…
Diamond Mesh Lath
Galvanized, Expanded Steel Plaster aND Stucco Base
A superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone reinforcement. Applications include…
Mega Lath
heavy duty Reinforcing
Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.
Paper-Backed Lath
Galvanized Expanded Steel Plaster/Stucco Base
A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal lath is used behind stone,…
Self-Furring V-Groove Lath
1/4" self-furring v-groove Expanded Steel Plaster or Stucco Base
Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the length of the sheet. The V’s allow…
Spray Rib Lath
more rigid than diamond lath and helps to prevent Plaster loss
3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep longitudinal solid steel ribs spaced at 3-7/8"…
Striplath
Reinforcement for corners, windows, doors and openings
Striplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is flexible for use over irregular surfaces.
Structalath III & Structalath III 316
Stucco Reinforcing
Structa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.
Twin Trac 2.5 & Twin Trac 2.5/316
Superior Stucco Reinforcing
Structalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.
V Truss - Walls & Ceilings