Products


Provides either a rigid connection OR vertical building movement up to 3”.
Universal Bypass Clips are used to attach exterior curtain wall studs to the building structure and provide either a rigid connection or deflecting connection for vertical building movement independent of the cold-formed steel framing.


Interior Nonload-Bearing Flexible Track
360TRAK™ is a flexible framing product that is a high-performance solution for creating intricate curves, bends, and variable radii for dramatic and distinctive walls and bulkheads in non-load bearing partitions and ceilings.


Clips melt away under intense heat, allowing a fire-damaged structure to collapse, while keeping the firewall barrier in place to protect the adjacent units
The clips are used to hold the area separation wall assembly in place at the floor, roof and truss line between adjacent units.


33mil, 43mil or 54mil Fire Shield System
ClarkDietrich’s BlazeFrame Shield is specifically designed for use in conjunction with approved fireblocking materials per section 718 of the IBC.


Sound isolation and dampening clip
Used to fasten gypsum wallboard in various wall and floor-ceiling applications, while simultaneously providing acoustical separation.


Custom connectors, clips or supports fabricated to your exact specifications
ClarkDietrich can custom fabricate just about any shape, bend, angle or specialty framing clip, connector or support to your exact specification. These custom products are manufactured using precision brake-forming equipment.

Hanger Wire is available in 8, 9 and 12 gauge

Hanger Wire & Tie Wire
Wire support for drop ceiling assemblies


Quickly facilitates the attachment of metal furring channel to 1-1/2" U-channel in ceiling assemblies
Metal Furring Channel Clips are made of galvanized wire and used to attach Metal Furring Channels to 1-1/2" U-channels in Drop Ceiling Assemblies.


PROVIDES LIFTING POINTS FOR PREFABRICATED PANELS
The ClarkDietrich Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on job-sites. The clip comes pre-punched for screw attachment to the panel as well as a larger hole for the clamp. The rounded design of the top of the panel clip allows for the clamp to slide freely without getting stuck on the corners. The Panel Lift Clip comes in 12ga and is offered in two sizes, 8” and 12”.