Search

CDHT6 and CDHT8 are high capacity hurricane ties that connect trusses to the top of wall plates in wood framing walls.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

PRODUCT DIMENSIONS

Product CodeSize
CDHT62-7/16" x 19-3/16"
CDHT81-7/16" x 8"
CDHT8-Dims

Used as a connection between truss/rafters and walls to resist lateral and uplift conditions.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available on CDHT2A, CDHT2.5A & CDHT3 only)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

PRODUCT DIMENSIONS

Product CodeSize
CDHT2A1-37/64" x 10-7/16"
CDHT2.5A1-5/8" x 6"
CDHT2.5T1-27/64" x 6-3/8"
CDHT31-5/8" x 4-5/8"
CDHT2A-Dims
CDH2-5A-Dims
CDH2-5t-Dims
CDHT3-Dims

Superior performance and easy installation. The hanger’s long straps can be field formed to the required height of the carried member. Face mount nailing options available. Designed and developed for Component Manufacturers to have a wide range of use including:

  • Ceiling hanger
  • Face mount hanger
  • Top flange hanger
  • Top flange over-the-back hanger

Reverse flange options available on some products.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
                 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available on CDSTH422)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product codeGaugeClear Seat WidthOverall HeightOverall Depth
CDSTH29181-5/8"8-25/32"2-5/16"
CDSTH29-2183-1/8"8-25/32"2-5/16"
CDSTH418163-5/8"16-1/16"1-31/32"
CDSTH422163-5/8"22-1/16"1-31/32"
CDSTHI1.81/22161-13/16"21-13/16"1-31/32"
CDSTHI222161-9/16"21-15/16"1-31/32"
CDSTHI322162-9/16"21-7/16"1-31/32"
CDSTHI422163-9/16"20-15/16"1-31/32"

 

Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation. Use the enhanced nailing schedule for greater load carrying capacities.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
                 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
(G185 available except CDMDS1.81/10, CDMDS210-3, CDMDS210-4, CDMDS26-3 & CDMDS28-4)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation. CDLDS utilizes a placement tooth to ease installation. Use the enhanced nailing schedule for greater load carrying capacities.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

The CDHTHA anchor series is manufactured to attach metal plate connected trusses, framing members and wall members, made of solid sawn or structural composite lumber; to solid sawn or structural composite lumber wall members.

The CDHTHA anchors resists upward load, lateral load perpendicular to the supported truss or framing member.

The CDHTHA2.5 product may be used on either or both sides for the supported member. Attachment is required to the lower portion of the supported truss or framing member, and the top plates of the supporting wall, or wall stud and anchored sill (bottom) plate(s).

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available on CDHTHA2.5)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

PRODUCT DIMENSIONS

Product CodeWidth (W)Height (H)
CDHTHA2.51"6"
CDHTHA42.125"4.5"

 

CDAHU is a face-mount hanger designed for wood plate trusses and heavily loaded members with a 2-3/4" seat dimension.

PRODUCT DIMENSIONS

Joist Sizes: Singles and Doubles, 2x4, 2x6, 2x8
Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeClear WidthOverall HeightOverall Depth
CDAHU261-9/16"5-1/2"2-3/4"
CDAHU281-9/16"6-1/2"2-3/4"
CDAHU2101-9/16"8-1/2"2-3/4"
CDAHU26-23-7/16"5-1/2"2-3/4"
CDAHU463-9/16"5-1/2"2-3/4"

CDLTH's combine greater strength with maximum economy. Prongs secure CDLTH hangers to header for fast, easy nailing. Economical price and ease-of-use make these an ideal hanger for the do-it-yourself market.

PRODUCT DIMENSIONS

Joist Sizes: Singles and Doubles, 2x4, 2x6, 2x8
Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
               (G185 available on CDLTH24-2, CDLTH26-2 & CDLTH28-2 only)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeClear WidthOverall HeightOverall Depth
CDLTH241-9/16"3-3/16"2-1/4"
CDLTH24-23-1/8"3-3/16"2-1/4"
CDLTH261-9/16"4-3/4"2-1/4"
CDLTH26-23-1/8"4-3/4"2-1/4"
CDLTH281-9/16"6-11/16"2-1/4"
CDLTH28-23-1/8"6-11/16"2-1/4"

 

CDLTH24 - Dims
CDLTH242-Dims
CDLTH26 - Dims
CDLTH262-Dims
CDLTH28 - Dims
CDLTH28-2 - Dims

The CDLSC load share clip series is manufactured to transfer loads between two truss or framing ply members made of solid sawn or structural composite lumber.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 Overall Dimensions (in)
Product CodeWH1H2D
CDLSC3232-7/161-1/22-1/2
CDLSC32-232-7/1632-1/2
CDLSC4233-7/161-1/23-1/2
CDLSC42-233-7/1633-1/2
CDLSC32
CDLSC32-2
CDLSC42
CDLSC42-2
Subscribe to