Search

Fast and easy - just slip over the sheathing edge. Eliminates unreliable wood blocking. For installation, use the same clip as plywood thickness.

Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeMaterial
CDPC383/8"
CDPC7167/16"
CDPC121/2"
CDPC585/8"
CDPC343/4"
CDPC153215/32"

 

Designed to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines. To protect supply lines, the nail stopper is installed over each point where utilities pass through framing members.

Material: 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeSize
CDNSP11-1/2" X 3"
CDNSP21-1/2" X 6"
CDNSP2 - Dims
CDNSP1-dims

Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only.

Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeSize
CDTP141" X 4"
CDTP242" X 4"
CDTP363" X 6"

 

CDFA1 angles provide the builder with the industry’s most versatile framing angle including:

  • Prongs - permit faster and easier installation.
  • Bending slots - make accurate bends for all 2- and 3-way anchoring ties on the job.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product Dimensions:

Width (W): 1-9/16"
Height (H): 4-11/16"
Depth (D): 1-9/16"

CDFA1 - Dims

CDFA2 angles have been designed especially for use on 2x4, 2x3, and 3x4 framing. Angles provide the following:

  • Prongs - permit faster and easier installation.
  • Bending slots - make accurate bends for all 2- and 3-way anchoring ties on the job.

Material: 18ga galvanized steel
Coating: G90
Yield Strength: 50ksi

Product Dimensions:

Width (W): 1-9/16"
Height (H): 2-3/8"
Depth (D): 1-9/16"

CDFA2 - Dims

12 gauge angles used to attach back-to-back installation. The staggered hold pattern minimizes wood splitting.

Material: 12ga (97mil), 0.1017" Design thickness, 0.0966" Minimum thickness
Coating: G185
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimensions
L1L2W
CDCA23G122-7/64"2-7/64"3"
CDCA24G122-7/64"2-7/64"4"
CDCA26G122-7/64"2-7/64"6"
CDCA28G122-7/64"2-7/64"8"
CDCA210G122-7/64"2-7/64"10"

 

Economical braces are ideal for gates, patio covers, joining posts and columns to headers, beams and other applications where added reinforcement is needed. Braces may be bolted for heavy-duty applications.

Material: 14ga (68mil), 0.0713 Design thickness, 0.0677 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimension
HLW
CD6LS146"6"1-1/2"
CD6TS145"6"1-1/2"
CD6LS-dims
CD6TS-dims

A one-piece design provides 3-way connection (top-bottom-side) for a variety of applications. Erection nail holes are provided to speed up installation.

The CDGC1 and CDGC2 attaches to truss gables and can be installed into wood. This provides greater lateral wind resistance.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimension
L1L2H
CDGC1181-1/64"1-1/64"2-25/32"
CDGC2181-19/64"1-19/64"3-5/16"
CDGC1-Dims

CDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints). Versatile angles that are nailed to reinforce intersecting wood members.

Medium angles are designed for standardization and construction economies.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
                 12ga (97mil), 0.1017" Design thickness, 0.0966" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

Product CodeGaugeDimensions
L1L2W
CDFA21182-1/16"1-37/64"1-3/8"
CDFA23182-1/16"1-37/64"2-3/4"
CDFA33123-7/32"3-1/16"1-1/2"
CDFA44124-15/32"4-15/32"1-3/16"
CDFA66126"6"1-1/5"
CDFA88128-1/8"8-1/8"2"

 

Subscribe to