Search

Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only.

Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeSize
CDTP141" X 4"
CDTP242" X 4"
CDTP363" X 6"

 

CDFA1 angles provide the builder with the industry’s most versatile framing angle including:

  • Prongs - permit faster and easier installation.
  • Bending slots - make accurate bends for all 2- and 3-way anchoring ties on the job.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product Dimensions:

Width (W): 1-9/16"
Height (H): 4-11/16"
Depth (D): 1-9/16"

CDFA1 - Dims

CDFA2 angles have been designed especially for use on 2x4, 2x3, and 3x4 framing. Angles provide the following:

  • Prongs - permit faster and easier installation.
  • Bending slots - make accurate bends for all 2- and 3-way anchoring ties on the job.

Material: 18ga galvanized steel
Coating: G90
Yield Strength: 50ksi

Product Dimensions:

Width (W): 1-9/16"
Height (H): 2-3/8"
Depth (D): 1-9/16"

CDFA2 - Dims

12 gauge angles used to attach back-to-back installation. The staggered hold pattern minimizes wood splitting.

Material: 12ga (97mil), 0.1017" Design thickness, 0.0966" Minimum thickness
Coating: G185
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimensions
L1L2W
CDCA23G122-7/64"2-7/64"3"
CDCA24G122-7/64"2-7/64"4"
CDCA26G122-7/64"2-7/64"6"
CDCA28G122-7/64"2-7/64"8"
CDCA210G122-7/64"2-7/64"10"

 

Economical braces are ideal for gates, patio covers, joining posts and columns to headers, beams and other applications where added reinforcement is needed. Braces may be bolted for heavy-duty applications.

Material: 14ga (68mil), 0.0713 Design thickness, 0.0677 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimension
HLW
CD6LS146"6"1-1/2"
CD6TS145"6"1-1/2"
CD6LS-dims
CD6TS-dims

A one-piece design provides 3-way connection (top-bottom-side) for a variety of applications. Erection nail holes are provided to speed up installation.

The CDGC1 and CDGC2 attaches to truss gables and can be installed into wood. This provides greater lateral wind resistance.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

Product CodeGaugeDimension
L1L2H
CDGC1181-1/64"1-1/64"2-25/32"
CDGC2181-19/64"1-19/64"3-5/16"
CDGC1-Dims

CDFA's provide fast, accurate bolting of two intersecting wood members (reinforcing intersection joints). Versatile angles that are nailed to reinforce intersecting wood members.

Medium angles are designed for standardization and construction economies.

Material: 18ga (43mil), 0.0451 Design thickness, 0.0428 Minimum thickness
                 12ga (97mil), 0.1017" Design thickness, 0.0966" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

Product CodeGaugeDimensions
L1L2W
CDFA21182-1/16"1-37/64"1-3/8"
CDFA23182-1/16"1-37/64"2-3/4"
CDFA33123-7/32"3-1/16"1-1/2"
CDFA44124-15/32"4-15/32"1-3/16"
CDFA66126"6"1-1/5"
CDFA88128-1/8"8-1/8"2"

 

Parent Product:
Deflection Track w/ ProTRAK Liner
67_33

Deflection Track w/ ProTRAK Liner

Deflection track for interior walls w/ ProTRAK Liner

ProTRAK Liner provides a vinyl barrier between framing members, serving as a break for metal-on-metal contact in head of wall assemblies. The ProTRAK Liner is friction fitted into a custom-size track and then shot in place using standard fastener attachments. ClarkDietrich ProSTUD is then installed in the usual manner. ProTRAK Liner is pliable and will not inhibit fastener attachment.

Product Data & Ordering Information:

Material Metal Deflection Track
        Coating: CP60 (CP90 available)
        33mils: 20ga STR, Grade 33ksi min. yield strength
           0.0346" Design Thickness, 0.0329" Min Thickness
        43mils: 18 Gauge, Grade 33ksi min. yield strength
           0.0451" Design Thickness, 0.0428" Min Thickness
        54mils: 16 Gauge, Grade 50ksi min. yield strength
           0.0566" Design Thickness, 0.0538" Min Thickness
        68mils: 14 Gauge, Grade 50ksi min. yield strength
           0.0713" Design Thickness, 0.0677" Min Thickness
  ProTRAK Liner
        Thickness: 0.050" PVC (Polyvinyl Chloride)
   
Dimensions:   2", 2-1/2" or 3" legs with an inside width equal to the depth of the stud.
  Standard widths available: 1-5/8", 2-1/2", 3-5/8", 4", and 6".
  Length: 10'-0"

For allowable lateral loads refer to the Technical tab on the Product page:
www.clarkdietrich.com/products/deflection-track-w-protrak-liner#technical-data

{{code_standards}}

{{leed}}

product_code  
PTL-STR  
   
Subscribe to