Search
Products
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Starter Strip / Casing Bead
Heavy-duty, base support starter strips and perimeter casing beads
For Exterior Insulation Finish Systems (EIFS), the perforated flanges allow the base coat mixture to easily flow through and bond…
DEFS Starter Strip / Casing Bead
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead. Two rows of large perforations…
DEFS Starter Strip with Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
Standard DEFS base support starter strip or as a perimeter casing bead with weep holes to direct…
DEFS Starter Strip / Casing Bead with Drip
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS) The drip leg assists in moving moisture away from the opening or the foundation walls.
DEFS Starter Strip with Drip and Weep Holes
Designed to protect the raw edges of the board in Direct-Applied Exterior Finish Systems (DEFS)
The drip leg assists in directing moisture away from the opening or the foundation walls.
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall board
For use in Direct-Applied Exterior Finish Systems (DEFS).
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Starter Strip with Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side
Designed with weep holes on the front side to move moisture away from openings in…
Starter Strip with Weep Holes in Back
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the back side
Designed with weep holes on the back side to move moisture away from openings in Exterior…
Starter Strip / Casing Bead with Drip
Heavy-duty base support starter strips and perimeter casing beads with a drip leg
Designed with a drip leg and without weep holes to move moisture away from openings in Exterior…
Starter Strip with Drip and Weep Holes in Front
Heavy-duty base support starter strips and perimeter casing beads with weep holes on the front side and a drip leg
Designed with weep holes on the front side and a drip leg to move moisture…
Sloped Starter Strip with Drip
Heavy-duty, base support starter strips and perimeter casing beads with drip legs
Sloped design with weep holes in the front provides drainage away from the substrate. The drip legs move moisture…
Surface Mount Casing Bead
Designed to be used as a surface-mounted, base support starter strip or a perimeter casing bead
For use in Exterior Insulation and Finish Systems (EIFS).
Header Weeped Starter Track
Designed with front weep holes and a drip leg to move moisture away from opening headers
Supplied with a disposable protective strip to prevent clogging during base coat application.
Drip Casing
Drip leg directs moisture away from openings and foundation walls
Designed to be used above window and door openings or at the foundation line to assist with moving moisture away from the wall. May…
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Metal J-Trim #400 (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfaces
Metal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Universal Starter Strip
One-size-fits-all starter strip that eliminates the need to inventory multiple sizesPerimeter base support and casing bead for Exterior Insulation and Finish Systems (EIFS) which has been engineered…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.