Search
Products
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Paper-Faced Inside Splayed Corner Bead
Used to create a sharp, crisp line for finishing inside off-angle or inverted splayed corners
Off-angle tape-on 120/135° inside or reverse splayed bead is used to achieve a crisp, clean, straight…
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
Channel Reveal - Surface Mount
Create clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Vented Channel Reveal - Surface Mount
Vented Channel Reveals facilitate perimeter air flow to assist in moisture management and temperature control
This vent is intended for surface-mount applications. Always use a rigid backing or…
Architectural Vented Channel Reveal - Surface Mount
A variation on the vented channel reveal for when the design style calls for a different aesthetic
The slots function in the same way as the holes on a standard Vented Channel Reveal, allowing air…
Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Architectural Vented "F" Channel Reveal - Surface Mount
"F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materials
Perforated flange allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Pre-Installed "F" Channel Reveal
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
Shallow Channel Reveal - Surface Mount
Creates clear surface channels in exterior wall and ceiling systems
Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
PRO-Bull 3/4" Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
PRO-Bull 3/4" Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
1-1/2" Bullnose Splayed Corner Bead
Creates contemporary splayed or off-angle rounded corners
Bullnose Splayed Corner Bead is designed for off-angle outside corner conditions. Adjustable from 120° to 140°.
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"F" Channel Reveal - Surface Mount
Surface-mounted "F" Channel Reveals provide a reveal at the juncture of walls, ceilings, or dissimilar materialsPerforated flanges allow the base coat mixture to easily flow through and bond with the…
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.