Search
Products
Bullnose Archmaker™ Corner Bead
True, uniform, curved, or arched corner reinforcement with a bullnose design.
Conforms to most arched and curved designs.
Archmaker™ Corner Bead
Provides true, uniform, curved, or arched reinforcement
Conforms to most arched and curved designs.
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases…
"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
EIFS/DEFS Bullnose Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight, with a soft, rounded aesthetic.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
PRO-Bull 3/4" Archway
For finishing arches, curvatures and most radii with a rounded bullnose look3/4" radius bullnose corner bead (VBAB) designed with slotted flange that easily forms to curves and arches with a soft,…
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.