Search
Products
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Quicksilver™ Corner Bead (CBS)
Hot-Dipped METAL CORNER BEAD
Quicksilver™ corner bead is used to achieve outside 90° corners at an economical price point.
Splayed Corner Bead (CB12)
Superior finish and reinforcement for off-angle drywall corners
120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.
Clinch-On Dull Corner Bead (CBCO)
Premier drywall finishing bead
Clinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.
Clinch-On Hot-Dipped Corner Bead (CBCS)
Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protection
Hot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision…
Paper-Faced Corner Bead
Lowering Labor Costs by removing one coat of compound
Paper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective,…
Strait-Flex® OS-300
DESIGNED FOR SQUARE, LOW-FILL OUTSIDE 90° CORNERSDiamond-punched paper edging allows for easier feathering, faster drying, and high bonding strength, which assures even lay-down of the paper,…
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occurDiamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.
"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stucco
The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
#36 Sill Screed
Exterior Foundation sill screed
A variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
Zinc Mini-Bead™ 800 and 900
Corner reinforcementZinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Positive Drain Weep Screed
Designed to provide a flashing transition
From stucco, siding, stone over a brick ledge, at a wall transition.
Mid Wall Weep Screed - M Style
Screed with built-in control joint
Accomodates expansion/contraction of the separate substrates.
Mid Wall Weep Screed with Weep Holes/Tape
Designed to relieve stress and assist in controlling cracks in exterior wall finish
Have built-in control joint to accommodate expansion/contraction of the separate substrates.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows…
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
103 Deluxe® Corner Bead (CBU)
Dull-Finish Metal Corner BeadClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is…
PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcementPRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1/4" Drip "V" Screeds
Designed for stucco or plaster soffits when drip and reveal need to be combined
West Coast Corner Bead (DWCB)
West coast Corner BeadClarkDietrich west coast corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed,…
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.