Search
Products
Katz™ Bridging Bar
Quick, efficient method to ladder frame between parallel joists or trusses
Katz™ bridging bar is specifically manufactured to ladder frame between parallel framing members and provide for the…
Flat Strapping
Multipurpose flat stock used for bracing, bridging or tension strapping
Flat Strapping is made in a variety of widths and thicknesses to meet different application requirements.
"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.
Structural Rim Track
Provide a lightweight, low-cost, rigid floor assembly
Structural track, usually in the same gauge as the joist, is used as rim or band enclosures.
Commercial Strapping
Multipurpose pre-punched commercial coil stock used for bracing, bridging or tension strapping
Coil Strapping is made in a variety of widths, each with a unique layout of pre-punched holes…
Light Truss End/Hip Jack Hanger
light truss end/hip jack hanger
The CDLEHJ accommodates an end jack and a right or left hip jack.
Purlin Hangers
purlin hangers
Designed specifically for agricultural and post-frame use with superior performance and easy installation.
Heavy Duty Joist and Truss Hangers
heavy duty joist and truss hangers
CDAGUS universal face-mount hanger is designed for wood plate trusses and heavily loaded members.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
Light Duty Face-Mount Hangers
light duty face-mount hangers
Prongs secure CDLTH hangers to header for fast, easy nailing.
Medium Duty Joist and Truss Hangers
medium duty joist and truss hangers
CDAHU is a face-mount hanger designed for wood plate trusses and heavily loaded members with a 2-3/4" seat dimension.
Double Shear Face-Mount Hangers - CDMDS
double shear face-mount hangers - CDMDS
Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation.
Adjustable Strap Hangers
ADJUSTABLE STRAP HANGERS
The hanger’s long straps can be field formed to the required height of the carried member.
EasyClip™ Quick Twist Web Stiffener
Provide reinforcement at critical load points to prevent web crippling
(QTWS) EasyClip™ Quick Twist Web Stiffeners are used to provide reinforcement of joist webs to prevent crippling.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.
TradeReady® Structural Bridging (TDSB)
Provides a quick and efficient method to prevent joist rotation
TradeReady® structural blocking is the third component of the TradeReady® steel floor system. Structural blocking is pre-cut to fit…
C-Joist
Provide a lightweight, low-cost, rigid floor assembly
C-Joist components provide an economical, lightweight alternative to open web trusses, bar joists, engineered lumber, cast-in-place or hollow…
Double Shear Face-Mount Hangers - CDLDS
double shear face-mount hangersDouble shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation.