Search
Products
3/4" Bullnose J-Bead
USED TO FINISH RAW EDGES OF WALLBOARD
Covers raw edges of drywall with 3/4" radius bullnose corner. Ideal for finishing door and window openings.
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsum
Rip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
"DX" Expansion Joint
Control cracking in large areas of wallboard
Provides stress relief and assists in the controlling of cracking across large areas of wallboard.
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes
Veneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1…
DEFS Muddable J-Bead
Designed to cover the raw edges of drywall board
For use in Direct-Applied Exterior Finish Systems (DEFS).
Soffit Vent with J-Flange
J-bead flanges cover the raw edges of soffit board
One-piece soffit vents provide an economical means for venting soffit areas. Vent clips are provided for proper connection and alignment of the…
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
#40 Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint
#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersections
J-Bead is designed to cover raw edges of drywall under all window and door casing.
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Metal J-Trim #400 (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfaces
Metal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areas
Where excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside corners
Parts come preassembled, and may require field alignment.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside corners
Parts come preassembled, and may require field alignment.
F40 (Female Casing Expansion Joint Compound)
Female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Compound)
Male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion joints
May be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slot
Used as a component of expansion joints, vents, reveals, etc.
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.