Search

Double shear nailing distributes loads at two points across the joist nails, reducing the number of nails and enabling quicker installation. CDLDS utilizes a placement tooth to ease installation. Use the enhanced nailing schedule for greater load carrying capacities.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

The CDHTHA anchor series is manufactured to attach metal plate connected trusses, framing members and wall members, made of solid sawn or structural composite lumber; to solid sawn or structural composite lumber wall members.

The CDHTHA anchors resists upward load, lateral load perpendicular to the supported truss or framing member.

The CDHTHA2.5 product may be used on either or both sides for the supported member. Attachment is required to the lower portion of the supported truss or framing member, and the top plates of the supporting wall, or wall stud and anchored sill (bottom) plate(s).

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available on CDHTHA2.5)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

PRODUCT DIMENSIONS

Product Code Width (W) Height (H)
CDHTHA2.5 1" 6"
CDHTHA4 2.125" 4.5"

 

CDAHU is a face-mount hanger designed for wood plate trusses and heavily loaded members with a 2-3/4" seat dimension.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

PRODUCT DIMENSIONS

Joist Sizes: Singles and Doubles, 2x4, 2x6, 2x8

 

Product Code Clear Width Overall Height Overall Depth
CDAHU26 1-9/16" 5-1/2" 2-3/4"
CDAHU28 1-9/16" 6-1/2" 2-3/4"
CDAHU210 1-9/16" 8-1/2" 2-3/4"
CDAHU26-2 3-7/16" 5-1/2" 2-3/4"
CDAHU46 3-9/16" 5-1/2" 2-3/4"

CDLTH's combine greater strength with maximum economy. Prongs secure CDLTH hangers to header for fast, easy nailing. Economical price and ease-of-use make these an ideal hanger for the do-it-yourself market.

Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
               (G185 available on CDLTH24-2, CDLTH26-2 & CDLTH28-2 only)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

PRODUCT DIMENSIONS

Joist Sizes: Singles and Doubles, 2x4, 2x6, 2x8

Product Code Clear Width Overall Height Overall Depth
CDLTH24 1-9/16" 3-3/16" 2-1/4"
CDLTH24-2 3-1/8" 3-3/16" 2-1/4"
CDLTH26 1-9/16" 4-3/4" 2-1/4"
CDLTH26-2 3-1/8" 4-3/4" 2-1/4"
CDLTH28 1-9/16" 6-11/16" 2-1/4"
CDLTH28-2 3-1/8" 6-11/16" 2-1/4"

 

CDLTH24 - Dims
CDLTH242-Dims
CDLTH26 - Dims
CDLTH262-Dims
CDLTH28 - Dims
CDLTH28-2 - Dims

The CDLSC load share clip series is manufactured to transfer loads between two truss or framing ply members made of solid sawn or structural composite lumber.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

  Overall Dimensions (in)
Product Code W H1 H2 D
CDLSC32 3 2-7/16 1-1/2 2-1/2
CDLSC32-2 3 2-7/16 3 2-1/2
CDLSC42 3 3-7/16 1-1/2 3-1/2
CDLSC42-2 3 3-7/16 3 3-1/2

 

CDLSC32
CDLSC32-2
CDLSC42
CDLSC42-2

The CDTBR24 is made from high-strength steel to meet the industry’s most demanding engineering standards. It was designed from the ground up to solve field installation problems. The Truss Spacer/Bracer is used for lateral bracing and spacing of trusses 24 inches on center.

The CDTBR24 meets BCSI-B2 Truss Installation & Temporary Restraint/Bracing requirements, with values that exceed the competition in every installation configuration. To eliminate potential safety issues, the edges have been rolled and the tabs are inverted for easy installation.

Material: 24 gauge (23mil) 0.0238" Design thickness, 0.0227" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

Product Dimensions

Length (L): 25-9/16"
Width (W): 1-1/2"
Depth (D): 5/8"

CDAGUS universal face-mount hanger is designed for wood plate trusses and heavily loaded members. 4" seat dimension provides greatest bearing area of any hanger available. Super capacity design loads are the highest of any universal face-mounted hanger. Larger header flange and joist seat make this hanger very easy to install with common nails.

Material: 12ga (97mil), 0.1017" Design thickness, 0.0966" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

PRODUCT DIMENSIONS

Joist and Truss Sizes: 2xs, double 2xs, triple 2xs

Designed specifically for agricultural and post-frame use with superior performance and easy installation. All of the hangers offer multiple installation methods, giving users maximum flexibility. Double-shear and straight nailing options available. Placement tooth or placement nail options for simplified installation.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

PRODUCT DIMENSIONS

D1 1-3/4"
D2 1-9/16"
H 1-9/16"
D 1-9/16"

 

The CDLEHJ accommodates an end jack and a right or left hip jack. Made from high strength steel, this hanger offers a high load capacity while requiring only half as many fasteners in the header. It is designed to be installed with the same length fastener in all members (10d x 1-1/2") unlike competitive products which require 3" fasteners in the header to achieve the stated loads.

 

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

      Overall Dimensions (in) Common Nail Type Fasteners
Product Code Min. Supporting Member Min. Supported End
and Hip Jack Height		 Width Height Depth Size (in) End Jack Qty Hip Jack Qty. Header Qty.
CDLEHJ 2 x 6 3.50 7.76 5.25 4.875 10d x 1.5 4 6 10

Note: For SI: 1in. = 25.4mm, 1lb. = 4.45 N
1 See images for hanger dimensions.
2 Refer to section 3.2.3 of ESR-5062 code report for nail sizes and the required minimum physical properties.

Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members. ClarkDietrich Rolled Strapping (CDRS) are 1-1/4" wide with holes punched at 1-1/4" on center, in a staggered pattern. Strapping is manufactured in continuous rolls of 250 feet for 20 gauge, 200 feet for 18 gauge and 150 feet for 16 gauge.

CDRS150
Material: 16ga (54mil), 0.0566" Design thickness, 0.0538" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

CDRS200
Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

CDRS250
Material: 20ga (33mil), 0.0346" Design thickness, 0.0329" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

 

 

Product Code Width (in) Length (ft)
CDRS150 1-1/4" 150'
CDRS200 1-1/4" 200'
CDRS250 1-1/4" 250'

 

Subscribe to