Search
Products
Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape
Relieves moisture from stuccoThe DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions. Install on frame construction for use in…
Foundation Weep Screed
Moisture removal from stuccoActs as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
#36 Sill Screed
Exterior Foundation sill screedA variation of the #7 style screed which allows trowel access underneath the screed to clean excess stucco material. No visible metal is seen below the stucco line.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior…
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for…
Wide Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.
Corner Expansion Joint (Outside Corner)
For conditions where the project requires expansion joint movement on outside cornersParts come preassembled, and may require field alignment.
M50 (Wide Male Casing Expansion Joint Compound)
Wide male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
F50 (Wide Female Casing Expansion Joint Compound)
Wide female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
#40 Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in wide or tall walls and ceilings to allow for multi-directional movement.
#40 Zinc Two-Piece Expansion Joint
Two-piece expansion control joint#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement…
"DX" Expansion Joint
Control cracking in large areas of wallboardProvides stress relief and assists in the controlling of cracking across large areas of wallboard.
Metal U-Trim / J-Bead #200-A (M20A)
Used in conjunction with joint compound when a clean, finished edge is requiredU-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and…
#701A/#801A J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit…
#701A/#801A Zinc J-Trim
Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishesVeneer trims 701A and 801A are J-shaped trims formed from Zinc Alloy to fit standard 1/2…
Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumMuddable J-Bead is designed to cover raw edges of drywall when butting up to other materials such as…
Rip-Bead® Muddable J-Bead
Used to finish drywall edges when dissimilar materials and door and window encasements meet gypsumRip-Bead® Muddable J-Bead is designed to cover the raw edges of drywall when butting up to other…
J-Bead
Creates a finished edge at gypsum stops around door and window openings and ceiling intersectionsJ-Bead is designed to cover raw edges of drywall under all window and door casing.
Metal J-Trim (M400 Series)
Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfacesMetal J-Trims are strong, reveal-type galvanized steel casings that provide maximum…
Mid Wall Lap Siding Transition Weep Screed
Creates Transition to Lap SidingThe mid-wall weep screed is designed to create a transition from stucco to lap siding while providing the necessary starting "offset" required for lap siding.
Corner Expansion Joint (Inside Corner)
For conditions where the project requires expansion joint movement on inside cornersParts come preassembled, and may require field alignment.
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on masonry construction where stucco and foundation walls meet.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet.
F40 (Female Casing Expansion Joint Component)
Female casing bead with an expansion slotUsed as a component of expansion joints, vents, reveals, etc.
M40 (Male Casing Expansion Joint Component)
Male casing bead, used as a component expansion jointsMay be used as a drip reveal or a slotted reveal, etc.
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stopInstall on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
Expansion Joints (Slip Joint)
Designed to relieve stress in wall and ceiling areasWhere excessive horizontal and vertical movements might occur.