Search
Products
PRO-90 Jumbo Corner Bead
Straight, rust-proof, dent-resistant corners where a wider flange is needed.
Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.
Rip-Bead® Shadow Reveal
Create 3/16" to 1" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Shadow Reveal
Create 1/2" to 3/4" reveals in drywall & veneer surfaces
Creates edge reveal when butting up to ceilings, base trim and other finished interior components.
Channel Reveal
Create 1/4" to 2" reveals in drywall surfaces
No backing or blocking needed.
"V" Channel Reveal
Create a modern look and shadowing effect
Designed with a dramatic, deep "V" reveal.
EIFS/DEFS Corner Bead
Designed for use in EIFS and DEFS wall and ceiling systems
These corner beads are hard to damage, rust-proof, and straight.
Soffit Drip - Surface Mount
Designed for exterior soffits where a drip screed and an edge reveal need to be combined
Used to direct moisutre away from the installation in EIFS and DEFS installations. Always use a rigid backing…
Soffit Drip - Pre-Installed
Designed for exterior soffits where a drip screed and edge reveal need to be combined
Pre-installed soffit edge reveals with a drip edge to direct moisture away from the installation.
Sloped Sill Wedge
Trim component used to provide a slope over the sill to direct intruding water to the outside of the weather-resistive barrier
This is not a flashing; it is intended for use in combination with…
Adjustable Inside Corner Trim
Inside Corner Trim
Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.
PRO-90 Combi Bead
Straight to curve arches
Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.
3/4" Bullnose Transition Cap
Used to transition 3/4" radius bullnose corner bead to a 90° square corner for installing baseboard or crown molding
Bullnose to 90° transition caps simplify installation of baseboard or crown…
PRO Splayed Corner Bead
Versatile, rigid corner reinforcement for off-angled wallboard intersections
PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.
Channel Reveal (with perforated flanges)
Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Drip Screed Reveals
Designed for stucco or plaster soffits when a drip and reveal need to be combined
To assist with moving moisture away from the wall.
PRO-90 Corner Bead
Impact-resistant vinyl corner reinforcementPRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.
PRO-90 Archway
Used to finish arches, curvatures and most radius conditionsPRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius…
"F" Channel Reveal
Create 1/4" to 1" reveals in drywall surfacesDesigned to be used at the juncture of door jambs, windows and other unfinished surfaces.
"F" Channel Reveals
Forms 1/2" to 2" reveals in wall and ceiling designsFormed at the juncture of dissimilar materials.
Factory Fabricated Channel Reveals
Create clear channel designs for drywall surfacesAll intersections are manufactured in a controlled factory environment to the highest quality standards.