Exterior Finishing: Corner Beads

GALVANIZED STEEL Expanded flange corner bead for exterior corners

A solid nose, all-purpose exterior corner bead. Strong and economical with multiple general use purposes.

Expanded flange corner bead for exterior corners

A strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance when compared with the galvanized steel…

RIGID, Expanded flange corner bead for exterior corners

A more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A Corner Bead provides extra strength and…

Provides true, uniform, curved, or arched reinforcement

Conforms to most arched and curved designs.

3/4" radius bullnose provides hard-to-damage, rust-proof corners

Designed for use in high-traffic areas.

3/4" radius bullnose corner bead that includes a shorter 1-1/2" flange for narrow returns

Designed for use in high-traffic areas.

For conditions where the project requires expansion joint movement on outside corners

Parts come preassembled, and may require field alignment.

Reinforcement for inside or outside corners

Cornerite™ reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking. Cornerite reinforcing angle is formed from finished, edge strip lath and bent…

Fully Embedded Corner Bead

Provides reinforcement like welded-wire or woven wire laths.

Provides damage-resistant, rust-proof, and straight corners

Designed with a shorter, 1-1/2" flange for narrow returns.

Provides hard-to-damage, rust-proof, and straight corners

Open triangles on the flanges allow for full embedment.

Corner Reinforcing

Innovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.

Wide Flange Corner reinforcement

Wide Flange Corner Bead is designed for deep fills, irregular corners, and for use in conditions, requiring two layers of 5/8" drywall.