FastBridge Clip (FB33, FB43 & FB68)

Used to secure u-channel to wall studs for lateral bracing

The ClarkDietrich FastBridge clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural or non-structural wall studs when used in load-bearing, curtain wall or drywall framing applications.

Description

The wall stud friction fit design allows for as little as one screw for the connection to the U-Channel.

The FastBridge clip is a stiffened, G90 galvanized steel clip that's tested and designed to facilitate the rapid, efficient installation of 1-1/2" U-Channel lateral bracing for exterior curtain wall framing, loadbearing walls or interior partitions constructed of structural or non-structural studs.

U.S. Patent No. D692,746 - Canadian Patent No. 152,547

FastBridge Clip is available in three versions:

  • (FB33) 20-gauge light-duty clip
    For use with 20-16 gauge structural studs or ProStud Drywall Studs
  • (FB43) 18-gauge light-duty clip
    For use with 20-16 gauge structural studs
  • (FB68) 14-gauge heavy-duty clip
    For use with 16-12 gauge structural studs

Alternative Products

Technical Data

FastBridge Clip Design Information

Installation

Installation:

U-Channel is inserted into the stud punchout (spacing as specified by design) and rotated into place (leg down).  Place the FastBridge Clip inside the punchout (stiffened wings down) and twist allowing the friction fit design to hold the clip into place. The clip must be firmly seated over the top web of the U-channel. FastBridge clips are fastened using #10 self-drilling screws driven through the clip hole into the U-channel. More than one screw may be need depending on design.

The FastBridge clip should not be used in studs over 8" wide.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
FB33 FastBridge Clip
FB43
FB68

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.