Panel Lift Clip (PLC)

PROVIDES LIFTING POINTS FOR PREFABRICATED PANELS

The ClarkDietrich Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on job-sites.  The clip comes pre-punched for screw attachment to the panel as well as a larger hole for the clamp.  The rounded design of the top of the panel clip allows for the clamp to slide freely without getting stuck on the corners.  The Panel Lift Clip comes in 12ga and is offered in two sizes, 8” and 12”.

Description

Our Panel Lift Clip is load rated and is used to safely lift wall panels at assembly warehouses or on a job-site.  The clip comes pre-punched for screw attachment to the panel as well as a larger hole for the clamp.  The rounded design of the top of the panel clip allows for the clamp to slide freely without getting stuck on the corners.  The Panel Lift Clip comes in 12ga and is offered in two sizes 8” and 12”.

 

Technical Data
Installation

Installation at Panel Ends

Install the Panel Lift Clips to each side and intermediate points of the panel.  For intermediate clip installation, cut a groove large enough to insert the clip through the top track. Quantity, location and anchoring of clips to panel as designed by EOR. 

 

Installation at Intermediate Panel Locations

Intermediate clip(s) are required for hoisting the panel.  For intermediate clip installation, cut a groove large enough to insert the clip through the top track. Quantity, location and anchoring of clips to panel as designed by EOR.

Hoisting of Panel

A spreader bar with intermediate hoisting points is required. 

Resources

Catalog Pages

 

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRODUCT SUBMITTAL SHEETS

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
PLC8 Panel Lift Clip

PLC12

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.