EasyClip™ A-Series™ End Clip

Used in knee wall connections or to reinforce jamb stud connections at the primary frame

EasyClip™ A-Series™ End Clips are most commonly used to reinforce connections in knee-wall applications or to reinforce jamb stud connections to the primary frame.

Description

These clips are unpunched as the specific application will determine the appropriate number and placement of fasteners.

  • 3" x 3" legs.
  • Available in 16, 14 and 12 gauge.
  • A-Series™ clips are unpunched.
  • Lengths available: 3" and 6".

Alternative Products

Technical Data
Installation

Installation

Easy Clip™ A-Series™ End Clips are attached to cold-formed steel framing members using #10 minimum selfdrilling screws. Clips can also be welded to the cold-formed steel framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. When using the tabular values for a welded clip, provide a full weld to the structure, top to bottom, along the outside of the clip. A 3/4" minimum weld to the outside edge of the 3" leg is also recommended to control warping or to hold the clip in place before final welding.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Gauge Description
A543 16 3 x 3 x 3 EasyClip™ A-Series™ End Clip
A546 16 3 x 3 x 6
A683 14 3 x 3 x 3
A686 14 3 x 3 x 6
A973 12 3 x 3 x 3
A976 12 3 x 3 x 6

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.