Skip to main content

Search

PRO Splayed Corner Bead

Versatile, rigid corner reinforcement for off-angled wallboard intersections

PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.

Application(s): Drywall

Multiple perforations along the 1-1/4" flanges enhance joint compound bonding. Easy to apply, this vinyl trim can be nailed, stapled or attached with a high tack spray adhesive. Vinyl beads are easily cut with snips or utility knifes without distorting the profile.

  • Rust proof and dent resistant.
  • Flexibility allows flush fit on unusual outside corner angles.

 

Step 1:
When installing the drywall, use the full drywall setback on the PRO Splayed Corner Bead to ensure proper fit and to achieve maximum adhesion. Avoid using the tapered edge of the drywall board on outside corners. Make sure the surfaces of the corner are clean and smooth. Measure and cut the PRO Splayed Corner Bead to length, subtract ½’ for vertical applications. Dry fit the corner bead to ensure the optimum fit.         

Step 2:
For optimal results spray the drywall surface and the flanges of the PRO Splayed Corner Bead with spray adhesive and position the corner bead into place. Once in position, apply pressure with handle of your taping knife and then staple the corner bead every 6”– 8” with ½” staples to keep the PRO Splayed Corner Bead to the drywall surface and to ensure a solid bond. 

Step 3:
Using an 8” taping knife, apply the first coat of joint compound to the surface of the PRO Splayed Corner Bead. The use lightweight compound or setting-type compound in this step will reduce shrinkage and speed up the drying time. Let this dry completely, for several hours or overnight. 

Step 4:
Using a 10” taping knife, apply the final coat of joint compound. Feather the compound beyond the previous coat. The use of all-purpose compound or topping compound will make for a more durable finish. Let this dry completely, for several hours or overnight. 

Step 5:
Lightly sand with 120 grit sandpaper to finish.

 

Code Approvals & Performance Standards

  • ASTM C840 Standard Specification for Application and Finishing of Gypsum Board
  • ASTM C841 Standard Specification for Installation of Interior Lathing and Furring
  • ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
  • ASTM D1784 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D3678 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior - Profile Extrusions
  • SDS Vinyl Corp PVC Compounds

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Product Submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
PROSB125 PRO Splayed Corner Bead

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.