Skip to main content

Search

Pipe-Patch

copper pipe patch

Pipe-patch repairs and reinforces mis-cut drywall.

Application(s): Drywall

Pipe-Patch is a copper pipe patch for mis-cut drywall around ceiling lights and can light receptacles.  Pipe-Patch will not fuzz-up during sanding.

  • Pre-cut to fit 1/2" and 3/4" copper pipes
  • Mis-cut drywall around ceiling lights and can light receptacles.
  • Great for fire taping
  • Pipe-Patch repairs and reinforces mis-cut drywall

Installation

  • To apply, lightly sand area to be repaired.
  • Apply drywall compound 1/8”-1/4" thick directly to back of patch.
  • Place patch over center of repair and wipe down flat to wall using joint knife.
  • Immediately skim-coat patch and let dry.
  • Apply second coat, let dry, and sand.
  • Compound that remains on backside of Pipe-Patch makes patch very rigid in the damaged area.
  • REPAIRS OVER PAINTED SURFACES - recommend the use of Strait-Flex Super-Bond mixed with all-purpose joint compound to enhance bondability

Code Approvals & Performance Standards

Storage:

All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.

Product Submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
PIP50-100, PIP50-500, PIP75-100, PIP75-500 Pipe-Patch

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.