Skip to main content

Search

#15 Zinc Double-V Control Joint

CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT

#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint counteracts the inherent shrinkage during stucco curing and general thermal changes and provides a higher degree of corrosion resistance than the galvanized steel version.

Application(s): Stucco

This nearly inconspicuous, expanded wing control joint minimizes cracking and assures proper plaster and stucco thickness.

  • Ground heights include 3/8” for thin coat plaster and 1/2", 3/4" and 7/8" for conventional plaster applications.
  • Follow use provisions outlined in ASTM C1063.
  • The #15 Double-V Control Joint is also available in galvanized steel for instances when increased corrosion resistance is not required.

Code Approvals & Performance Standards

  • ASTM B69 Standard Specification for Rolled Zinc
  • ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
  • ASTM C1861 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
  • SDS Zinc Strip Cold Formed Finished Products
 

Product submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
VVJZ #15 Zinc Double-V Control Joint

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.