Rip-Bead® Flat L-Bead (CT0)

Cover raw edges of drywall

Designed for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall.

Description

Designed for areas where the drywall is butted too close to slip the return leg over the raw edge of the drywall at ceilings, windows and other finished interior components. Features a 1/4" removable leg that acts as a protective mask for joint compound application and as a guide for the taping knife.

Resources

ASTM & Code Standards

  • ASTM C1047 - Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
  • ASTM D1784 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D3678 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Interior Profile Extrusions
  • Installation: ASTM C840 - Standard Specification for Application and Finishing of Gypsum Board
  • SDS & Product Certification Information

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet

Product Code Description
CT0-8, CT0-10 Rip-Bead® Flat L-Bead

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System