EasyClip™ D & T-Series™ Anchor Clips

EasyClip™ D-Series Anchor Clip

EasyClip™ D-Series Anchor Clip

Provide cost effective tie-down solutions for knee walls, shear walls and truss connections

The EasyClip™ D-Series™ & T-Series™ Anchor Clips are high-performance, cost effective solutions for knee wall-to-foundation connections, light duty shear wall-to-foundation connections and truss to wall connections.

Description

These multi-application clips feature reinforced stiffening ribs that provide superior design values for maximum performance. The EasyClip™ D-Series™ & T-Series™ Anchor Clips are designed to resist horizontal, torsional, and vertical (uplift) loads. These clips are prepunched with a series of attachment holes (including anchor bolt, kwik-con and screw holes) for efficient and accurate fastener placement.

  • Resist uplift, horizontal and rotational loads.
  • Stiffening ribs for superior design values.
  • Prepunched holes for fast attachment.
  • Multipurpose applications.

Alternative Products

Technical Data
Installation

Installation

Install EasyClip™ D-Series™ or T-Series™ Anchor Clips by attaching the screw hole only leg to the web of the stud, joist, rafter or track with the applicable # of fasteners (screws or welds). Secure bottom leg (anchor bolt hole) to structure using prepunched holes provided with appropriate fastener type and number of fasteners according to design based on load requirements.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Gauge Description
D683 14 2 x 2 x 3-1/2 EasyClip™ D & T-Series™ Anchor Clips
T683 14 2 x 4 x 3-1/2
D685 14 2 x 2 x 5-1/2
T685 14 2 x 4 x 5-1/2
D973 12 2 x 2 x 3-1/2
T973 12 2 x 4 x 3-1/2
D975 12 2 x 2 x 5-1/2
T975 12 2 x 4 x 5-1/2

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.