Paper-Faced Bullnose Splayed Tape-on

Provides rounded 120°–135° outside drywall corners for a contemporary "modern" look

Off-angle bullnose tape-on bead, also known as splayed bullnose or 120/135° bullnose corner bead is used to provide a rounded, bullnose finish for off-angle drywall intersections.

Description

Paper-faced tape-on off-angle bullnose bead is applied in the same manner as 90° paper bead. Joint compound is used to embed the paper-faced bead to the wallboard paper. The result is a clean, crisp, rounded off-angle corner that will not crack or chip.

  • Virtually eliminates costly callbacks
  • Impervious to “scuffing” and "fluffing-up"
  • Will not be damaged by sanding
  • Substantially reduces joint compound consumption and eliminates one finish coat
  • Does not require mechanical fastening (No nails, staples, screws or crimps)
  • Superior adhesion, bonding and paintability.
  • U.S. Patent Nos. 5,613,335 and 5,836,122

Material: 0.0125 galvanized coating

 

Resources

ASTM & Code Standards:

 

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
CD1-OBN or POBO Paper-Faced Bullnose Splayed Tape-on

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.