L-angle / corner angle
Non-structural corner angles commonly used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle commonly used for connection strut or angle, concrete pour stop, roof ridge angles and corner reinforcement.
Non-structural corner angles used to connect, reinforce or secure metal stud framing in various drywall applications.
Structural L-Angle is commonly used for a variety of applications including: concrete pour stop, connection strut or angle, roof ridge angles and corner reinforcement.
- Standard leg sizes are 2”x2” and 3”x3”.
- Wider and uneven leg sizes available.
- Available in 25, 20 DW, 20 STR, 18, 16, 14 and 12 gauge.
- Standard 10’ lengths. Other lengths available on request.
- Contact ClarkDietrich Technical Services at 888-437-3244 for help with creating product submittals for custom angle sizes.
Product Data & Ordering Information:
Non-Structural Material
Material: Grade 33ksi min. yield strength
18mils (25ga), 0.0188" Design Thickness, 0.0179" Min. Thickness
30mils (20ga DW), 0.0312" Design Thickness, 0.0296" Min. Thickness
Coating: G40EQ (G40 or G60 available)
Structural Material
Material: Grade 33ksi min. yield strength
33mils (20ga STR), 0.0346" Design Thickness, 0.0329" Min. Thickness
43mils (18ga), 0.0451" Design Thickness, 0.0428" Min. Thickness
54mils (16ga), 0.0566" Design Thickness, 0.0538" Min. Thickness
68mils (14ga), 0.0713" Design Thickness, 0.0677" Min. Thickness
97mils (12ga), 0.1017" Design Thickness, 0.0966" Min. Thickness
Coating: CP60 (G90 available)
Documents
Code Approvals & Performance Standards
- AISI S220-20 North American Standard for Cold-Formed Steel Framing - Nonstructural Members
- (Compliant to ASTM C645, but IBC replaced with AISI S220 in IBC 2015)
- Section A3 Material - Chemical & mechanical requirements (Referencing ASTM A1003/A1003M)
- Section A4 Corrosion Protection (Referencing ASTM A653/A653M)
- Section C Installation - (Referencing ASTM C754)
- AISI S240-20 North American Standard for Cold-Formed Steel Structural Framing
- (Compliant to ASTM C955, but IBC replaced with AISI S200 in IBC 2015, AISI S240 in IBC 2018)
- Section A3 Material - Chemical & mechanical requirements (Referencing ASTM A1003/A1003M)
- Section A4 Corrosion Protection (Referencing ASTM A653/A653M)
- Section C Installation - (Referencing ASTM C1007)
- SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories
CAD Details
Note: to view all of ClarkDietrich's CAD details, visit the CAD Details Library.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| 100x100 L-Angle | 1" x 1" L-Angle |
| 125x125 L-Angle | 1-1/4" x 1-1/4" L-Angle |
| 150x150 L-Angle | 1-1/2" x 1-1/2" L-Angle |
| 200x200 L-Angle | 2" x 2" L-Angle |
| 200x400 L-Angle | 2" x 4" L-Angle |
| 250x250 L-Angle | 2-1/2" x 2-1/2" L-Angle |
| 300x300 L-Angle | 3" x 3" L-Angle |
| 400x400 L-Angle | 4" x 4" L-Angle |
| 500x500 L-Angle | 5" x 5" L-Angle |
| 600x600 L-Angle | 6" x 6" L-Angle |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.