FastClip™ Slide Clip (FCSC-HD) w/Anchor Holes

Vertical building movement up to 3"

ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement independent of the cold-formed steel framing.

Description

FastClip Deflection Screws are provided with each clip for attachment to the wall studs and allow for 3" vertical deflection (1-1/2" up and down) to ensure friction-free sliding.  A 5/8" hole in the short leg of the clip allows for a 1/2" concrete anchor to be attached to the slab. (2) 3/8" holes allow for 1/4" anchors.

Installation

Installation:

To attach the clip to the cold-formed steel framing stud, three FastClip deflection screws, shall be driven through the slotted holes and positioned to allow for the appropriate building deflection. Attachment to the structure concrete slab can be made with 1/2" bolt anchors.  Anchor connection design and edge distance requirements must be approved by a design professional before installation.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
FCSC-HD FastClip™ Slide Clip w/Anchor Holes

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.