Skip to main content

Search

Spazzer® Snap-In Grommet (SPGR)

used to secure the Spazzer® bar

The Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications

The Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications

Alternative Products

Installation

Load-Bearing Wall

The TradeReady Spazzer 5400 bar is passed through the stud knockouts and rotated 90° into position, engaging each side of the knockout. For load-bearing studs, the Spazzer snap-in grommet requires screws to keep the bar in place. The TradeReady Spazzer 5400 bar should be installed at a maximum 4' o.c. vertically or per  specification, and should not be used in studs over 6" wide.


Non-Load-Bearing Wall

The TradeReady Spazzer 5400 bar is passed through the stud knockouts and rotated 90° into position, engaging each side of the knockout. For 20 gauge studs, the Spazzer snap-in grommet requires screws to keep the bar in place.  The TradeReady Spazzer 5400 bar should be installed at maximum 5' o.c. vertically or per specification, and should not be used in studs over 6" wide.

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
SPGR Spazzer® Snap-In Grommet

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.