Interior Finishing: Corners

Dull-Finish Metal Corner Bead

ClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into…

ghostBead Square Corner Bead seamlessly blends with joint compound

ClarkDietrich GhostBead metal corner bead uses a white surface treatment to blend in with joint compound. This traditional drywall finishing product is nailed, stapled,…

Lowering Labor Costs by removing one coat of compound

Paper-faced tape-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective, problem-free outside drywall corner finishing

Provides square drywall corners and is used when nailing or mechanical fastening is desired

Paper-faced nail-on beads combine galvanized metal corner and edge protection with high-grade paper to provide cost-effective, problem-free…

Inside Corner Trim

Adjustable inside corner hinge with shoulders designed to keep the corner straight during installation.

Premier drywall finishing bead

Clinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.

Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protection

Hot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision as its counterpart.

Versatile, rigid corner reinforcement for off-angled wallboard intersections

PRO Splayed corner bead is an adjustable corner bead designed for off-angle outside corner conditions from 120° to 140°.

Used to finish arches, curvatures and most radius conditions

PRO-90 Archway Corner Bead is an extra rigid vinyl archway designed with slotted flanges that easily forms to curves and arches. The radius on the nose aides in smooth and easy…

Straight to curve arches

Designed with "T" slotted flanges to create straight-to-curve arches by simply cutting the ends of "T" slots where an arch or curvature is desired.

Impact-resistant vinyl corner reinforcement

PRO-90 Corner Bead is an extra rigid vinyl corner bead designed for stiffness and strength. A slight radius on the nose makes for easy, smooth finishing.

Straight, rust-proof, dent-resistant corners where a wider flange is needed.

Designed with extra wide, 1-3/4" flanges to cover two layers of 5/8" drywall.

Hot-Dipped METAL CORNER BEAD 

Quicksilver™ corner bead is used to achieve outside 90° corners at an economical price point.

Superior finish and reinforcement for off-angle drywall corners

120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.

DESIGNED FOR SQUARE, LOW-FILL OUTSIDE 90° CORNERS

Diamond-punched paper edging allows for easier feathering, faster drying, and high bonding strength, which assures even lay-down of the paper, providing maximum adhesion without rippling or…

DESIGNED for outside 90° corners where large voids and irregularities occur

Diamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.

West coast Corner Bead

ClarkDietrich west coast corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place.

Corner reinforcement

Zinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges are tapered along the outer edges to…