Quickly facilitates the attachment of metal furring channel to 1-1/2" U-channel in ceiling assemblies
Metal Furring Channel Clips are made of galvanized wire and used to attach Metal Furring Channels to 1-1/2" U-channels in Drop Ceiling Assemblies.
Clips must be installed on alternating sides of the 1-1/2" channels. Use tie wire when clips cannot be alternated.
Clips should only be used when single-layer gypsum or single-layer veneer plaster base is used.
- Securely fastens furring channel to U-channel
- Corrosion-resistant galvanized wire
- Clip Express Sales at 866-638-1908 or clipexpress@clarkdietrich.com
- Technical Support at 888-437-3244 or support@clarkdietrich.com
Product Data & Ordering Informaiton
| Product code | Diameter | Approx. breaking strength* | Max. recommended load** |
|---|---|---|---|
| MFCC | 0.134" | 200 lbs | 50 lbs |
* Approximate Breaking Strength (Ultimate lbs. without safety factor)
- Recommended Safety Factor = 1/4
** Max. Recommended Load is for each clip recommended for suspension
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| MFCC | Metal Furring Channel Clips |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Clip Express Sales at 866-638-1908 or clipexpress@clarkdietrich.com
- Technical Support at 888-437-3244 or support@clarkdietrich.com