Skip to main content

Stucco Futures

Stucco Futures
INDUSTRY INSIGHTS.
TECHNICAL DISCUSSIONS.
BETTER BUILDING ENVELOPES.


Stucco Futures

Stucco Futures brings contractors, manufacturers, consultants, architects, distributors and experts together to talk through cracking, water management, continuous insulation, fire performance, codes and field installation. Browse what we have learned, by topic.

Explore By Topic

Content is organized around the challenges the industry keeps coming back to, not by meeting date. Each topic collects the discussions, takeaways and outside references that touch it.

ONE-COAT SYSTEMS FOR ENERGY EFFICIENCY:

Various proprietary One-Coat systems over foam improve the energy efficiency of a building. Structalath 316 and Structalath Twin Trac 316 have been used successfully over foam board insulation on wood sheathing or steel framing with Dens glass or on open-frame to increase the R-value in 1/2″ or 7/8″ stucco systems. The 316 – decreased furr versions of Structalath does not deform the foam and provides a solid plaster base for full wire embedment.

Structalath 316 with Continuous insulation
Structalath 316 with Continuous Insulation
Residential wood frame
TwinTrac 2.5 with Continuous insulation
TwinTrac 2.5 with Continuous Insulation
Commercial project over steel & wood framing

Minimize fastener thermal breaks

Structa Wire × DuPont™ ArmorWall™: Continuous Insulation as an Energy Efficient System: 
Energy code requirements increasingly demand true continuous insulation (CI) — but traditional lath assemblies, which fasten through the insulation layer into stud framing, can create thermal bridging that undercuts the very performance the wall system is designed to deliver. Structa Wire is engineered to fasten directly to the DuPont™ ArmorWall™ panel, without extending fasteners through to the stud framing. That means the continuous insulation layer stays intact — no thermal shorts, no compromised R-value at every fastener point.
Why it matters:

  • Preserves continuous insulation performance — supports ASHRAE 90.1 CI and thermal bridging code requirements as part of the ArmorWall syste.
  • Code-backed — validated per 2024 IBC and ASTM C926/C1063, with third-party evaluation from Intertek (Letter Report 106339481MID-001a)
  • System-engineered, not just compatible — Structa Wire lath was developed and tested specifically for direct-to-panel attachment on ArmorWall
  • Sustainability-aligned — part of a GreenCircle-certified, LEED-eligible wall assembly
Dupont ArmorWall
Dupont ArmorWall
With Structa Wire Welded Wire Lath
Related Products
See Installation tab for more info
Mega Lath

heavy duty Reinforcing

Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.

Structalath-III_Application
Structalath III & Structalath III 316

Stucco Reinforcing

Structa Wire lath is a welded wire lath, engineered to enhance the performance of stucco and is a part of the ClarkDietrich Easy Embedment System.

See Installation tab for more info
Twin Trac 2.5 & Twin Trac 2.5/316

Superior Stucco Reinforcing

Structalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.