Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape

Relieves moisture from stucco

The DS15-78-25WX is a combination Drip Screed with Casing Bead and Control Joint for use in stucco plane transitions.  Install on frame construction for use in stucco plane transitions.

Description

The DS15-78-25WX Drip Screed is placed at the bottom of framed wall construction at the stucco plane transition. Weather resistant barriers on the vertical plane are placed over the top of the drip screed to ship-lap.  Weather resistant barriers on the horizontal plane are placed under the horizontal flange of the Drip Screed.  With weep holes in the casing bead component, the accessory encourages proper moisture drainage away from the stucco installation. Along with weep holes, the casing bead component provides a ¼” drip leg to ensure that moisture escapes the vertical component and does not travel to the horizontal plane. The control joint component features a taped V-groove joint to keep material out of the joint during installation and to provide a clean finish with minimal effort by simply removing the tape after the stucco has been applied. Additionally, this control joint component allows for movement of the trim during temperature fluctuations and helps to prevent cracking as the installation shifts with the changes in the building. The vertical flange is a non-perforated vinyl casing and weather barriers are placed over it to act as a flashing and as a stucco stop with weep.  The drip screed component is ideal for soffit transitions, balconies, or any protrusion of size outside the vertical wall and serves to maintain the plaster look.  The 3-1/2" solid attachment flange installed in this procedure complies to Chapter 25 if IBC, Chapter 7 of IRC and ASTM C-1063 (stucco) and ASTM C-1780 for Thin Veneer Stone.

Resources

ASTM & Code Standards

  • ASTM C841/C1063 - Veneer and plaster accessories - Interior & Exterior
  • ASTM C1861 - Standard Specification for lathing and furring accessories, and fasteners, for interior and exterior portland cement-based plaster
  • ASTM D1784 - Rigid poly vinyl chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D4216 - Rigid poly vinyl chloride (PVC) and related PVC and chlorinated poly vinyl chloride (CPVC) building products compounds
  • ASTM C1063 - Installation of metal plaster base systesm
  • ASTM C1780 - Installation of adhered manufactured stone veneer
  • SDS & Product Certification Information

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Submittals

Product submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
DS15-78-25WX Vinyl 3-1/2" Drip Screed w/ Weep Holes and Tape

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.