Wide Flange Corner Bead

wide flange Corner reinforcement

ClarkDietrich Wide Flange Corner Beads are designed for deep fills or for use in irregular corner conditions.

Description

Vinyl is impervious to corrosion when placed in contact with steel or aluminum frames, when coated in veneer plaster or wet joint compounds, and resists impacts, dents, and damage during construction. Vinyl has low electrical and thermal conductivity and is considered an excellent insulator, as well as being self-extinguishing and offering better resistance to burning than many other common building materials. No priming is required to add paint to vinyl products due to its paint adhesion properties. Additionally, vinyl has a lower cost than equivalent products manufactured from zinc or aluminum, for use when the highest levels of corrosion resistance are required.

#40 is pictured, there are 5 types of Wide Flange Corner Bead for different applications dictated by the size required by the corner condition.

 

Resources

ASTM & Code Standards

  • ASTM C841/C1063 - Veneer and plaster accessories - Interior & Exterior
  • ASTM C1861 - Standard Specification for lathing and furring accessories, and fasteners, for interior and exterior portland cement-based plaster
  • ASTM D1784 - Rigid poly vinyl chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D4216 - Rigid poly vinyl chloride (PVC) and related PVC and chlorinated poly vinyl chloride (CPVC) building products compounds
  • ASTM C1063 - Installation of metal plaster base systesm
  • ASTM C1780 - Installation of adhered manufactured stone veneer
  • SDS & Product Certification Information

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
#40, #30, #43, #4150, #3150 Wide Flange Corner Bead

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.