Archmaker™ Corner Bead

Provides true, uniform, curved, or arched reinforcement

Conforms to most arched and curved designs.

Description

Provides true, uniform, curved, or arched reinforcement. Conforms to most arched and curved designs. #2 is a heavier version of the corner bead used for increased damage resistance. #1XArch and #2XArch are designed with a shorter, 1-1/2" flange for narrow returns.

ClarkDietrich has the widest selection of corner beads in the industry. All these accessories are produced with exterior grade-PVC and have a uniform thickness with feathering at the flange ends. Smooth, rounded noses and easily-bent Archmaker™ corners provide solutions across a variety of conditions. Provides hard-to-damage, rust-proof, and straight corners. Large triangular perforations allow material to easily flow through and bond to the substrate for a more durable corner. Standard length is 10ft. on all corner beads.

 


 

Resources

ASTM & Code Standards

  • ASTM C841/C1063 - Veneer and plaster accessories - Interior & Exterior
  • ASTM C1861 - Standard Specification for lathing and furring accessories, and fasteners, for interior and exterior portland cement-based plaster
  • ASTM D1784 - Rigid poly vinyl chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D4216 - Rigid poly vinyl chloride (PVC) and related PVC and chlorinated poly vinyl chloride (CPVC) building products compounds
  • ASTM C1063 - Installation of metal plaster base systesm
  • ASTM C1780 - Installation of adhered manufactured stone veneer
  • SDS & Product Certification Information

Storage:

All stored materials shall be kept dry.  Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
#!Arch, #2Arch Archmaker™ Corner Bead
#!XArch, #2XArch

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.