ClarkDietrich Seismic and Hurricane Ties are designed to provide wind and seismic resistance for trusses and rafters.
Quick and efficient, these versatile connectors can also be used for general tie-down purposes, strong back attachments and as all-purpose ties where one member crosses another.
The H2A seismic and hurricane tie is formed from a flat plate into an A-shaped section. The plate has a right-angle bend along its longitudinal axis to permit straddling a top plate.
The H2.5 and the H3 are twisted strap ties that are used to attach a rafter to the side of the top plate. All connections are shipped in equal quantities of separate rights and lefts.
Place the tie so one end fits flush against the roof framing member and the other fits flush against the web of the wall stud. Attach the tie to the side of the rafter at the top and to the sides of the stud immediately below the top plate at the bottom. Fill all prepunched holes with a minimum of #10 self-drilling screws.
Place the tie so the top fits securely against the roof framing member and the bottom fits securely against the top plate and flange of the wall stud. Attach the tie to the rafter at the top and to the sides of the top plate and stud immediately below. Fill all prepunched holes with a minimum #10 self-drilling screws.
Reference section R 603.8.3.2 of the International Residential Code (IRC) or the engineer of records specification.
Click the below Product Code to view Submittal/Tech Datasheet
|Product code||Gauge||Mils||Design thickness (in)||Size (in)|
|H2A||18||43||0.0451||1-9/16 x 9-7/16 x 1-9/16|
|H2.5||18||43||0.0451||1-9/16 x 5-7/16 x 1-9/16|
|H3||18||43||0.0451||1-9/16 x 4-5/8 x 1-9/16|
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.