Roll-Patches

continuous patch material

Continuous roll patch width allows material to be cut to any length.

Application(s): Drywall
Description

Roll patch easily installs using standard drywall compounds. The patch material is imprinted with standard receptacle patterns for easy trimming. Roll-Patch will not fuzz-up during sanding.

  • Continuous roll patch allows material to be cut to any length
  • Imprinted with standard electrical outlet patterns to make repairs easy
  • PVC fiber composite material
  • Drywall damage
  • All patching applications
Installation

Installation

  • Cut patch to desired dimensions.
  • Prepare surface by cleaning and lightly sanding area around receptacle.
  • Apply 1/4" of quick set or drywall compound directly to back of Roll Patch.
  • Flip over patch and position Roll Patch over center of repair and wipe down flat to wall using joint knife.
  • Immediately skim coat edges of patch and let dry. Compound that remains on back side of Roll Patch in damaged or mis-cut areas makes Roll Patch very rigid.
  • Apply second coat. Let dry and sand. Roll Patch will not fuzz up during sanding.
Resources

Storage:

All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.

Submittals

Product Submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
RP5.5 x 20-6, RP5.5 x 100-4, RP11 x 20-6, RP11 x 50-1 Roll-Patches

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.