Perma-Patch

multi-purpose drywall patch

Perma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.

Description

The patches are imprinted with can light and standard receptacle patterns for easy trimming. Perma-Patch will not fuzz-up during sanding. One Perma-Patch repairs holes up to five inches in diameter.

  • Outperforms metal patches
  • Quickly repairs door knob damage to drywall
  • Makes easy repairs to receptacles, ceiling and can lights, and miscuts
  • Imprinted with can light and standard receptacle patterns for easy trimming
  • The most economical and permanent way to repair drywall
Installation

Installation

  • To apply, lightly sand area to be repaired.
  • Apply drywall compound 1/8”-1/4” thick directly to back of patch.
  • Place patch over center of repair and wipe down flat to wall using joint knife.
  • Immediately skim-coat patch and let dry.
  • Apply second coat, let dry, and sand. Compound that remains on backside of Perma-Patch makes patch very rigid in the damaged area.
Resources

Storage:

All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.

 

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet

Product Code Description
PP-2PK, PP-100, PP-500 Perma-Patch

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System